期刊


ISSN2363-9512
刊名Progress in Additive Manufacturing
参考译名添加剂制造进展
收藏年代2017～2024



全部

2017 2018 2019 2020 2021 2022
2023 2024


题名作者出版年年卷期
Factors affecting interface bonding in multi-material additive manufacturingDelia, Sarah; Rochman, Arif; Curmi, Albert20242024, vol.9, no.5
The impact of Ti6Al4V powder reuse on the quality of electron beam powder bed fusion partsBorrelli, R.; Bellini, C.; Berto, F.; Di Cocco, V.; Foti, P.; Iacoviello, F.; Mocanu, L. P.; Pirozzi, C.; Razavi, N.; Franchitti, S.20242024, vol.9, no.5
A review of the current state-of-the-art on in situ monitoring in electron beam powder bed fusionGrasso, Marco; Colosimo, Bianca Maria20242024, vol.9, no.5
The EditorialHitzler, Leonhard; Merkel, Markus20242024, vol.9, no.5
Towards sustainable injection moulding using 3D printed conformal cooling channels: a comparative simulation studyClark, Rebecca; Rochman, Arif; Refalo, Paul; Farrugia, Philip; Vella, Pierre20242024, vol.9, no.5
Prediction of fatigue lifetime and fatigue limit of aluminum parts produced by PBF-LB/M using a statistical defect distributionStrauss, Lea; Loewisch, Guenther20242024, vol.9, no.5
Developing auto process mapping technique for powder bed fusion using an electron beamAoyagi, Kenta; Ono, Manabu; Yanagihara, Keiji; Wakoh, Kimio; Chiba, Akihiko20242024, vol.9, no.5
Characterization of flexural fatigue behaviour of additively manufactured (PBF-LB) gyroid structuresSchultheiss, Garvin; Heine, Burkhard; Merkel, Markus20242024, vol.9, no.5
The effect of low hydrogen content on hydrogen embrittlement of additively manufactured 17-4 stainless steelBen-Hamu, Guy; Metalnikov, Polina; Eliezer, Dan20242024, vol.9, no.5
Fracture mechanisms of selective laser sintered parts manufactured in build directionCronau, J.; Kroenert, M.; Engstler, F.20242024, vol.9, no.5
12345678910...



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024