《国际科技文献速递:通用机械》     2024年  第 07 期


              阀门       风机       压缩机       真空、干燥、冷却、空分机械       减变速机


本期共收录论文265篇,以下为部分内容,如需查看全部内容请进行注册,并联系010-88379895成为高级会员。


【标题】BOURG-EN-BRESSE: L'IUT Lyon 1 inaugure la Heat Pump Academy

【类型】 期刊

【作者】 ROSE COLOMBEL

【摘要】 L'IUT Lyon 1, le Groupe Atlantic et la Region Auvergne Rhone-Alpes ont donne le coup d'envoi de la Heat Pump Academy, une nouvelle plateforme de formation dediee aux pompes a chaleur. Cap sur la PAC pour l'Universite Claude Bernard Lyon 1 - site de Bourg-en-Bresse, qui accueille une toute nouvelle plateforme de formation: la Heat Pump Academy. L'inauguration s'est deroulee le 27 octobre dernier, en presence du Groupe Atlantic et de la Region Auvergne-Rhone-Alpes, qui a finance ce projet a hauteur de 180 000 {EUR}.

【来源】 RPF: Revue Pratique du Froid et du Conditionnement d Air 2023

【入库时间】 2024/7/29

 

阀门


【标题】MESURE: HydraForce met l'accent sur la qualite de ses valves

【类型】 期刊

【作者】 Karim Boudehane

【摘要】 HydraForce, fabricant de valves a cartouche hydrauliques, a choisi le nouveau Rondcom NEX CNC d'Accretech pour augmenter sa capacite de controle qualite dans le domaine de la mesure de haute precision de la geometrie des alesages. HydraForce est un important fournisseur de valves a cartouche hydrauliques, de valves electro-hydrauliques, de collecteurs sur mesure et de commandes electro-hydrauliques. L'entreprise fournit des industries de la manutention, de l'agriculture, de l'energie hydraulique, de la construction et des mines, dans le monde entier. La nature exigeante de sa clientele implique des normes de qualite de pointe dans tous ses sites de fabrication mondiaux. Installee dans l'Advanced Manufacturing Hub a Aston, Birmingham, HydraForce Hydraulics est le siege europeen de sa maison mere aux Etats-Unis.

【来源】 Fluides & Transmissions 2024

【入库时间】 2024/7/29

 

风机


【标题】VANGUARD ENGINE FOR NEW BUFFALO TURBINE DEBRIS BLOWER

【参考中译】新款布法罗涡轮机碎片鼓风机的先锋发动机

【类型】 期刊

【作者】 Michael J. Brezonick

【摘要】 Buffalo Turbine introduced the Cyclone KB23 tow-behind debris blower, which it said is ideal for municipal and government work. The Cyclone KB23 has a Briggs & Stratton Vanguard EFI gasoline engine rated 23 hp that runs a directdrive turbine. A 12-function wireless remote allows instant control of engine start/stop, throttle speed and 360-degree nozzle control. It also has auto nozzle positioning with six positive stops for quickly locating optimum blowing angles at a touch of a button, said the company. The new unit comes standard with an off-road trailer package and can also be skid mounted in a UTV or truck. A DOT trailer package for highway use is also available at additional cost.

【参考中译】 Buffalo Turbine推出了Cyclone KB 23牵引式碎片鼓风机,据称该鼓风机非常适合市政和政府工作。Cyclone KB 23配备一台Briggs & Stratton Vanguard NPS汽油发动机,功率为23马力,运行直接驱动涡轮机。12功能无线遥控器可即时控制发动机启动/停止、油门速度和360度喷嘴控制。该公司表示,它还具有自动喷嘴定位功能,带有六个正止动器,只需轻轻一按即可快速定位最佳吹风角度。新装置标配越野拖车套件,也可以滑动安装在UTV或卡车上。还可以额外付费购买用于高速公路的DOT拖车包。

【来源】 Power Progress 2024, vol.90, no.1

【入库时间】 2024/7/29

 

压缩机


【标题】DOOSAN ADDS 150-HP INDUSTRIAL AIR COMPRESSOR

【参考中译】斗山添加150-HP工业空气压缩机

【类型】 期刊

【作者】 Michael J. Brezonick

【摘要】 Doosan Bobcat's industrial air compressor lineup now includes a 150-hp fixed-speed, oil-flooded, rotary screw air compressor. Introduced in August as the D150, it will become the IA150 in 2024 as part of the company's transition to rename and rebrand all Doosan Industrial Air products to align to the Bobcat brand and style. The D150 is rated 705 cfm at 125 psig with nominal power of 150 hp (1150 kW). It features a IE3 premium efficiency TEFC (totally enclosed, fan-cooled) motor that offers protection against outside contaminants, such as dust or moisture. Its 100,000 hour-rated airend features three bearings for improved reliability, maximized uptime and minimized downtime, according to the company.

【参考中译】 Doosan Bobcat的工业空气压缩机阵容现在包括一台150马力的固定速度、油浸式旋转螺旋空气压缩机。它于8月推出,名称为D150,将于2024年更名为IA 150,这是该公司对所有斗山工业空气产品进行重新命名和品牌重塑以与山猫品牌和风格保持一致的转型的一部分。D150在125磅/平方英寸(磅/平方英寸)时的功率为705立方英尺(1150千瓦)。它配备IE 3高效率TEFC(全封闭、风扇冷却)电机,可防止灰尘或湿气等外部污染物。据该公司称,其100,000小时的通风机配备三个轴承,可提高可靠性、最大限度地提高工作时间并最大限度地减少停机时间。

【来源】 Power Progress 2024, vol.90, no.1

【入库时间】 2024/7/29

 

真空、干燥、冷却、空分机械


【标题】Thermodynamic Performance Enhancement of an Air Conditioner With Dew Point Evaporative Cooler

【参考中译】采用露珠蒸发冷却器提高空调的热力性能

【类型】 期刊

【关键词】 Dew point evaporative cooler; Cooling load; Energy efficiency ratio; Energy saving; Air conditioner

【参考中译】 冰点蒸发冷却器;冷负荷;能效比;节能;空调

【作者】 Sunil Kumar Gupta; B. B. Arora; Akhilesh Arora

【摘要】 The vapor-compression-based conventional split air conditioners (CACs) consume a large portion of total electrical power and pose an alarming threat to global environment. The present work aims to reduce cooling load and power consumption of CAC by employing a dew point evaporative cooler (DPEC). DPEC consists of a counter flow type heat and mass exchanger with alternate layers of dry and wet channels. The intake air is sensibly cooled before entering the cooling room through the evaporator coil of the air conditioner. Also, the working air (a part of outlet air in dry channel), after absorbing sensible heat of intake air and water vapors from the wet channel surface, is allowed to pass across the condenser coils. The intake dry-bulb temperature (T_0= 29-44℃) and specific humidity (ω_0=6-22 g/kg) are taken as input parameters. While the cooled air entering the evaporator decreases the cooling load on the conditioned space, the compression work is also reduced due to increased heat transfer in the condenser. The maximum reductions in cooling load and monthly energy consumption at T_0=44℃ and ω_0=6 g/kg are found as 59.54% and 340 kWh, respectively. The water consumption for different months of the cooling season varies from 1037.8 L to 2905.95 L. The average energy savings with the DPEC system for hot-dry climate (from April to June) and hot-humid climate (from July to September) of New Delhi, India, are observed to be 479.6 kWh and 79.1 kWh, respectively. The proposed system is found to payback in about 3.37 years.

【参考中译】 以蒸汽压缩为基础的传统分体式空调机消耗了很大一部分电能,对全球环境构成了令人担忧的威胁。本工作旨在通过采用露点蒸发冷却器(DPEC)来降低CAC的冷负荷和能耗。DPEC由逆流型热质交换器组成,具有交替的干层和湿层通道。进气空气通过空调的蒸发器盘管进入冷却室前进行合理冷却。此外,工作空气(干通道中出口空气的一部分)在吸收来自湿通道表面的进气和水蒸气的显热后,被允许通过冷凝器盘管。输入参数为进气干球温度(T_0=29~44℃)和比湿度(ω_0=6~22 g/kg)。虽然进入蒸发器的冷却空气减少了空调空间上的冷负荷,但由于冷凝器内的热量增加,压缩功也减少了。在T_0=44℃和ω_0=6g/kg时,空调冷负荷和月能耗的最大降幅分别为59.54%和340kWh。降温季节不同月份的用水量从1037.8 L到2905.95 L不等。印度新德里干热气候(4~6月)和湿热气候(7~9月)的平均节能值分别为479.6千瓦时和79.1千瓦时。拟议的系统被发现在大约3.37年内就能收回成本。

【来源】 Journal of Engineering for Sustainable Buildings and Cities 2024, vol.5, no.1

【入库时间】 2024/7/29

 

减变速机


【标题】Roller Screw and Threaded Chain Speed Reducer: An Experimental Evaluation

【参考中译】滚柱丝杆和螺纹链减速器:实验评价

【类型】 期刊

【关键词】 Speed reducer; Inverted roller screw; Chain drive; Threaded chain drive

【参考中译】 减速机;倒置滚柱丝杆;链传动;螺纹链传动

【作者】 Filiberto Gutierrez

【摘要】 We are developing a speed reducer that can be considered a transformation of a worm gear reducer: the worm is replaced by an inverted roller screw, and the gear is replaced by a threaded chain drive. This configuration lessens wear, increases load capacity, and improves efficiency. The threaded chain consists of nut-shaped links. This paper presents the results of tests carried out on a prototype with a reduction ratio of 46.

【参考中译】 我们正在开发一种减速机,可以认为是对涡轮减速机的改造:用倒置的滚柱丝杆取代了涡轮,用螺纹链传动取代了齿轮。这种配置减少了磨损、增加了负载能力并提高了效率。螺纹链由坚果形链节组成。本文介绍了对减速比为46的原型进行的测试结果。

【来源】 Modern mechanical engineering 2024, vol.14, no.1

【入库时间】 2024/7/29

 




来源期刊
Fluides & Transmissions《液压与传动》
Journal of Engineering for Sustainable Buildings and Cities《可持续建筑与城市工程杂志》
Modern mechanical engineering《现代机械工程》
RPF《实用制冷与空调杂志》