期刊


ISSN0043-2288
刊名Welding in the World
参考译名世界焊接
收藏年代1999～2024



全部

1999 2000 2001 2002 2003 2004
2005 2006 2007 2008 2009 2010
2011 2012 2013 2014 2015 2016
2017 2018 2019 2020 2021 2022
2023 2024

2024, vol.68, no.1 2024, vol.68, no.2 2024, vol.68, no.3 2024, vol.68, no.4 2024, vol.68, no.5 2024, vol.68, no.6
2024, vol.68, no.7 2024, vol.68, no.8

题名作者出版年年卷期
Prof. Dr.-Ing. Hans HoffmeisterBoellinghaus, Thomas; Cross, Carl20242024, vol.68, no.2
Influence of modelling methods of a fluctuating weld geometry on the fatigue assessment using the effective notch stress approachPawlowitz, Tobias; Bohlmann, Berend; Knueppel, Philipp20242024, vol.68, no.2
Properties oriented WAAM-microstructural and geometrical control in WAAM of low-alloy steelTreutler, Kai; Gehling, Tobias; Scheck, Maxim; Richter, Andreas; Bohn, Christian; Ehlers, Ruediger; Rembe, Christian; Wesling, Volker20242024, vol.68, no.2
Behaviour of aluminium/steel hybrid RSW joints under high cycle fatigue loadingMeilinger, Akos; Cserepi, Mariann Fodorne; Lukacs, Janos20242024, vol.68, no.2
Influence of welding thermal cycles on properties of TMCP and Q&T steels evaluated by thermo-physical simulationNeumann, Martin; Haelsig, Andre; Hensel, Jonas20242024, vol.68, no.2
Deformation and residual stress of T-shaped joints fabricated by laser-arc hybrid welding for steel bridge membersChen, Gang; Hirohata, Mikihito; Hyoma, Kengo; Matsumoto, Naoyuki; Inose, Koutarou20242024, vol.68, no.2
Evaluation of dry sliding wear behavior of thermally sprayed and microwave post-processed TiO 2 reinforced tungsten carbide composite coatingPradeep, D. G.; Nithin, H. S.; Sharath, B. N.; Madhu, K. S.20242024, vol.68, no.2
Investigation of creep performance degradation mechanism of service exposed P92 steel and microstructural characterization of FGHAZLi, Yong; Wang, Jiaqing; Du, Chengchao; Wang, Qihong20242024, vol.68, no.2
Effect of welding heat input on the corrosion behaviour of high strength steel rebarsGandhi, Devang; Nag, Anushri; Perka, Ashok Kumar20242024, vol.68, no.2
Overcoming underfill defect with undermatching filler and establishing new acceptance criteria for underfill depth in laser beam welding of ultra-high strength steelsLee, Yoona; Park, Sanghyeon; Seon, Jeongan; Han, Haksoo; Lee, Kwanghyeon; Kang, Namhyun20242024, vol.68, no.2
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024