期刊


ISSN0972-7396
刊名MTT
参考译名今日制造技术
收藏年代2009～2023



全部

2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023

2023, vol.22, no.1 2023, vol.22, no.2 2023, vol.22, no.3 2023, vol.22, no.4 2023, vol.22, no.5 2023, vol.22, no.6

题名作者出版年年卷期
Investigation into energy interaction behavior of nitinol SMA during WECMNaresh Besekar; B. Bhattacharyya20232023, vol.22, no.5
On the performance analysis of micro-hole drilling using magnetic field-assisted electrochemical spark machiningRoopa Singh; D. K. Singh; Jeeoot Singh20232023, vol.22, no.5
Effect of step pulse waveform in electrochemical micromachining for dimension controlHimadri Sekhar Panda; B. Bhattacharyya20232023, vol.22, no.5
On electrochemical discharge milling of glass with horizontal tool and vertically upward feeding techniqueSudip Santra; Biplab Ranjan Sarkar; Biswanath Doloi; Bijoy Bhattacharyya20232023, vol.22, no.5
Jet pressure influence on micro-abrasive waterjet trepanned hole in CFRP composite materialRajesh Ranjan Ravi; D. S. Srinivasu20232023, vol.22, no.5
Hybrid strategy for enhancing the dimensional accuracy and surface finish of abrasive waterjet milled pocketsChinmoyee Datta; D. S. Srinivasu20232023, vol.22, no.5
Understanding and predicting material removal rate in abrasive waterjet milling of kerfsT. N. Deepu Kumar; D. S. Srinivasu20232023, vol.22, no.5
Characterization of microwave-drilled holes in kenaf-reinforced epoxy compositesRampal; Sunny Zafar20232023, vol.22, no.5
Operational feasibility of Maglev EDM using powder mixed dielectric for machining Ti-grade 5 alloyRajesh Sahoo; Vivek Bajpai; Nirmal Kumar Singh20232023, vol.22, no.5
FEM modeling for predicting temperature profile of heat affected zone in single spark EDM processS. C. Sonthalia; Gaurav Bartarya; S. Mullick20232023, vol.22, no.5
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024