期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2023, vol.124, no.1/2 2023, vol.124, no.10 2023, vol.124, no.11/12 2023, vol.124, no.3/4 2023, vol.124, no.5/6 2023, vol.124, no.7/8
2023, vol.124, no.9 2023, vol.125, no.1/2 2023, vol.125, no.11/12 2023, vol.125, no.3/4 2023, vol.125, no.5/6 2023, vol.125, no.7/8
2023, vol.125, no.9/10 2023, vol.126, no.1/2 2023, vol.126, no.11/12 2023, vol.126, no.3/4 2023, vol.126, no.5/6 2023, vol.126, no.7/8
2023, vol.126, no.9/10 2023, vol.127, no.1/2 2023, vol.127, no.11/12 2023, vol.127, no.3/4 2023, vol.127, no.5/6 2023, vol.127, no.7/8
2023, vol.127, no.9/10 2023, vol.128, no.1/2 2023, vol.128, no.11/12 2023, vol.128, no.3/4 2023, vol.128, no.5/6 2023, vol.128, no.7/8
2023, vol.128, no.9/10 2023, vol.129, no.1/2 2023, vol.129, no.11/12 2023, vol.129, no.3/4 2023, vol.129, no.5/6 2023, vol.129, no.7/8
2023, vol.129, no.9/10

题名作者出版年年卷期
Grasping point optimization for sheet metal part based on GSA-Kriging model in a multi-robot assembly systemZhu Chenxi; Wan Xiao-Jin; Zhou Zhengjie20232023, vol.125, no.5/6
Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil bathsMouralova Katerina; Benes Libor; Prokes Tomas; Zahradnicek Radim; Fries Jiri; Plichta Tomas20232023, vol.125, no.5/6
Five-axis flank milling error model of a face gear considering the tool tip dynamicsCai Sijie; Yao Bin; Cai Zhiqin; Shen Zhihuang; Huang Haipeng; Lin Bingjing; Lin Jianchun; Huang Haibin; Liu Jianchun20232023, vol.125, no.5/6
Study on milling material removal mechanism and surface integrity of nickel-based single crystal superalloy DD5Zhang Huan; Gong Yadong; Liang Chunyou; Sun Yao; Zhao Jibin20232023, vol.125, no.5/6
Investigation of material removal mechanisms of laser-structured Si3N4 via single diamond grit scratchingPaknejad Masih; Azarhoushang Bahman; Zahedi Ali; Khakrangin Mehdi; Kadivar Mohammad Ali20232023, vol.125, no.5/6
Investigation on self-sensing monitoring and resonant control of ultrasonic vibration–assisted cuttingYu Fuhang; Zhang Chen; Gan Xiaoming; Hu Xin20232023, vol.125, no.5/6
Vibration compensation of delta 3D printer with position-varying dynamics using filtered B-splinesChou Cheng-Hao; Okwudire Chinedum E.; Edoimioya Nosakhare20232023, vol.125, no.5/6
Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with cornerWang Jiapeng; Liu Jinping; Wang Bin; Huang Xiaomin; Wang Baoyu20232023, vol.125, no.5/6
Optimizing the cutting edge geometry of micro drill based on the entropy weight methodYang Haotian; Jiang Feng; Wu Xian; Zhao Guolong; Shi Xixiang; Liu Guangda; Wang Mingsheng20232023, vol.125, no.5/6
Laser welding of tailored blanks made of Al-Si-coated 22MnB5 steel using a filler wire and a variable energy distribution laser opticsCoviello Donato; von der Heydt Jana; Rullo Lorenzo; Ke?ler Michael; De Vito Mariarosaria; D’Angola Antonio; Sorgente Donato20232023, vol.125, no.5/6
1234567



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024