期刊


ISSN0898-1507
刊名Lasers in engineering
参考译名工程激光
收藏年代2002～2024



全部

2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023 2024

2021, vol.48, no.1/3 2021, vol.48, no.4/6 2021, vol.49, no.1/3 2021, vol.49, no.4/6 2021, vol.50, no.1/3 2021, vol.50, no.4/6

题名作者出版年年卷期
Microstructure and Mechanical Analyses of Laser Clad Stainless Steel and Stainless Steel-SiCp Mixture Powders on a Mild Steel SubstrateSabour, H. A.; Taha, M. A.; Gany, K. A.; Farid, A.; Youssef, A. G.; Elbashar, Y. H.20212021, vol.50, no.4/6
Laser-based Detection of Rotation Speed with High Accuracy and High signal-to-noise Ratio (SNR) Based on the Rotational Doppler EffectLi, Z-M; Chen, L-L; Ren, Y.; Qiu, S.; Liu, T.; Wang, C.; Wang, H.20212021, vol.50, no.4/6
Low Power Laser Transmission Welding (LTW) of Clear to Clear Acrylic Transparent PolymersKumar, D.; Kuar, A. S.; Maity, N.20212021, vol.50, no.4/6
Experimental Method for a Double-pulse Laser-driven Flyer and Flyer Motion SimulationGeng, D-S; Chen, L.; Lu, J. Y.; Wu, J. Y.; Yang, K.20212021, vol.50, no.4/6
Identification of Liposarcoma from Biopsy of the Abdomen Using Microscopy with a Diode Laser Light Source at a Wavelength of 630 nm and an Ultraviolet (UV)/Visible Spectrophotometer in the Wavelength Range of 190 to 1100 nmUllah, H.; Nazir, M. Rizwan A.; Batool, Z.20212021, vol.50, no.4/6
Effect of a Cu Interlayer on the Joining of a TiAl-based Alloy and a Ni-based Superalloy by Laser WeldingXiao, Z. Y.; Cai, X. L.; Zhao, H. Y.; Wang, K. Y.; Gu, X. Y.; Li, H. M.20212021, vol.50, no.4/6
On the Applicability of Standard Resolution Targets in Quantitative Phase Imaging Based on Multi-angle Laser Illumination Digital Holographic Microscopy (DHM)Zeng, Y-N; Chang, X-Y; Hong, Y-J; Lu, J-S; Hu, X. D.20212021, vol.50, no.4/6
Laser-induced Superhydrophobic and Oleophobic Surface Structures on Float GlassJagdheesh, R.; Bicistova, R.; Brajer, J.; Mocek, T.20212021, vol.50, no.4/6
A Thin Silver-based Hafnium Oxide (HfO2/Ag/HfO2) Layer Deposition Technique and Laser Optical and Surface Morphology CharacterizationAsif, M.; Ramzan, M.; Ullah, H.; Imran, M.; Naz, G.; Fahim, F.; Khan, A. R.20212021, vol.50, no.4/6
Laser Cladding of Ti6Al4V Alloy with Al2O3-SiC-Ag Modified Titanium Powder and the Accompanying ProtectionLiu, B.; Yan, B-G; Hu, B.; Jin, L.; Zhu, L.; Lv, P-J; Lu, P.; Wang, F.; Jiang, K-Y20212021, vol.50, no.4/6
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024