期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2021, vol.112, no.1/2 2021, vol.112, no.11/12 2021, vol.112, no.3/4 2021, vol.112, no.5/6 2021, vol.112, no.7/8 2021, vol.112, no.9/10
2021, vol.113, no.1/2 2021, vol.113, no.11/12 2021, vol.113, no.3/4 2021, vol.113, no.5/6 2021, vol.113, no.7/8 2021, vol.113, no.9/10
2021, vol.114, no.1/2 2021, vol.114, no.11/12 2021, vol.114, no.3/4 2021, vol.114, no.5/6 2021, vol.114, no.7/8 2021, vol.114, no.9/10
2021, vol.115, no.1/2 2021, vol.115, no.11/12 2021, vol.115, no.3 2021, vol.115, no.4 2021, vol.115, no.5/6 2021, vol.115, no.7/8
2021, vol.115, no.9/10 2021, vol.116, no.1/2 2021, vol.116, no.11/12 2021, vol.116, no.3/4 2021, vol.116, no.5/6 2021, vol.116, no.7/8
2021, vol.116, no.9/10 2021, vol.117, no.1/2 2021, vol.117, no.11/12 2021, vol.117, no.3/4 2021, vol.117, no.5/6 2021, vol.117, no.7/8
2021, vol.117, no.9/10

题名作者出版年年卷期
Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loadsRen, Xiaoqiang; Chen, Chao; Qin, Denglin; Wu, Jinliang; Ouyang, Yawen20212021, vol.117, no.3/4
Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc millingSong, Dan; Zhou, Jianping; Li, Xuezhi; Chen, Xiaokang; Liu, Kai; Wang, Shuaishuai; Wang, Xiang; Wang, Kedian20212021, vol.117, no.3/4
Numerical investigation on the effects of circuit parameters on the plastic deformation of fastener holes in thin aluminum alloy via electromagnetic expansion processXu, Xiaofei; Geng, Huihui; Cao, Qingshan; Cao, Quanliang; Li, Liang; Ouyang, Xiaoping20212021, vol.117, no.3/4
Machinability study and ANN-MOALO-based multi-response optimization during Eco-Friendly machining of EN-GJL-250 cast ironLaouissi, Aissa; Nouioua, Mourad; Yallese, Mohamed Athmane; Abderazek, Hammoudi; Maouche, Hichem; Bouhalais, Mohamed Lamine20212021, vol.117, no.3/4
Evaluating the hole quality produced by vibratory drilling: additive manufactured PLABaraheni, Mohammad; Shabgard, Mohammad Reza; Amini, Saeid20212021, vol.117, no.3/4
Sinterability properties of a ceramic synthesized from Algerian kaolin and spent magnesia-carbon refractory bricksMebrek, Alima20212021, vol.117, no.3/4
Additive manufacturing of AISI 420 stainless steel: process validation, defect analysis and mechanical characterization in different process and post-process conditionsLiverani, Erica; Fortunato, Alessandro20212021, vol.117, no.3/4
Research on a multidimensional strain energy estimation method for welding spots based on performance optimizationSong, Haisheng; Yang, Changhai; Yang, Na; Li, Kunheng; Chen, Zhiyong20212021, vol.117, no.3/4
Data-driven sustainability evaluation of machining system: a case studyLi, Wenyi; Gao, Mengdi; Zhang, Cuixia; Wang, Cui; Liu, Conghu; Zhu, Guang20212021, vol.117, no.3/4
A geometric prediction model of surface morphology in micro-EDM considering stochastic characteristics of discharge crater sizeHou, Shaojie; Bai, Jicheng20212021, vol.117, no.3/4
12345



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024