期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2021, vol.112, no.1/2 2021, vol.112, no.11/12 2021, vol.112, no.3/4 2021, vol.112, no.5/6 2021, vol.112, no.7/8 2021, vol.112, no.9/10
2021, vol.113, no.1/2 2021, vol.113, no.11/12 2021, vol.113, no.3/4 2021, vol.113, no.5/6 2021, vol.113, no.7/8 2021, vol.113, no.9/10
2021, vol.114, no.1/2 2021, vol.114, no.11/12 2021, vol.114, no.3/4 2021, vol.114, no.5/6 2021, vol.114, no.7/8 2021, vol.114, no.9/10
2021, vol.115, no.1/2 2021, vol.115, no.11/12 2021, vol.115, no.3 2021, vol.115, no.4 2021, vol.115, no.5/6 2021, vol.115, no.7/8
2021, vol.115, no.9/10 2021, vol.116, no.1/2 2021, vol.116, no.11/12 2021, vol.116, no.3/4 2021, vol.116, no.5/6 2021, vol.116, no.7/8
2021, vol.116, no.9/10 2021, vol.117, no.1/2 2021, vol.117, no.11/12 2021, vol.117, no.3/4 2021, vol.117, no.5/6 2021, vol.117, no.7/8
2021, vol.117, no.9/10

题名作者出版年年卷期
Numerical simulation of magnetic pulse radial compaction of W-Cu20 powder with a field shaperLi, Fenqiang; Li, Hui; Ge, Xiaohong; Zhao, Jun; Wu, Huawei; Lin, Jia; Huang, Guimei20212021, vol.114, no.1/2
Hydrodynamic action in slicing PV polysilicon with a novel fixed and free abrasive combined wire sawingPu, Tianzhao; Gao, Yufei; Yin, Youkang; Wang, Liyuan20212021, vol.114, no.1/2
Laser-induced oxidation-assisted micromilling of deep narrow microgroove on Inconel 718Xin, Lianjia; Zhang, Bin; Liu, Hanliang; Yang, Yinfei; Li, Liang; Zhao, Guolong20212021, vol.114, no.1/2
Optimisation of the wear resistance properties of laser cladded T-800 coatingsMalikongwa, Kinsman; Tlotleng, Monnamme; Olakanmi, Eyitayo Olatunde20212021, vol.114, no.1/2
Research on rolling process of bow parts with variable lateral roll spacing based on optimal bending angle distribution functionSu, Chunjian; Li, Zhen; Yang, Hongxi; Lou, Shumei; Lv, Yuting; Zhang, Guosong; Wang, Rui20212021, vol.114, no.1/2
A comparative study on the evolutions of thermal and mechanical parameters and microstructure of 30Si2MnCrMoVE steel during hot ACDR and upsetting deformationWang, Hai; Liu, Dong; Zhang, Fuxiang; Zhang, Zhe; Wang, Jianguo; Yang, Yanhui20212021, vol.114, no.1/2
Impact of wear parameters on NiCr-WC10Co4Cr and WC10Co4Cr HVOF sprayed composite coatings using response surface methodologyMazouzi, Azzeddine; Rezzoug, Amine; Cheniti, Billel; Lebouachera, Seif El Islam; Miroud, Djamel; Boukantar, Aniss-Rabah; Drouiche, Nadjib; Djerdjare, Boubekeur20212021, vol.114, no.1/2
Defect-free high-feed milling of Ti-6Al-4V alloy via a combination of cutting and wiper insertsEhsan, Sana; Khan, Sarmad Ali; Rehman, Mudassar20212021, vol.114, no.1/2
Active vibration control of thin-walled milling based on ANFIS parameter optimizationWang, Xiaojuan; Song, Qinghua; Gupta, Munish Kumar; Liu, Zhanqiang20212021, vol.114, no.1/2
The heat flow coupling effect of laser-assisted magnetorheological polishingZhang, Zhengyan; Geng, Kang; Qiao, Guochao; Zhang, Jianhua20212021, vol.114, no.1/2
1234