期刊


ISSN1745-2759;1745-2767
刊名Virtual and Physical Prototyping
参考译名虚拟与实体成型技术
收藏年代2006~2022



全部

2006 2007 2008 2009 2010 2011
2012 2013 2014 2019 2020 2021
2022

2019, vol.14, no.2 2019, vol.14, no.3 2019, vol.14, no.4

题名作者出版年年卷期
Influence of surface pores on selective laser melted parts under lubricated contacts: a case study of a hydraulic spool valveZhu, Y.; Yang, Y.; Lu, P.; Ge, X.; Yang, H.20192019, vol.14, no.4
Effect of support on printed properties in fused deposition modelling processesJiang, Jingchao; Lou, Jingjun; Hu, Guobiao20192019, vol.14, no.4
Design and experimental validation of self-supporting topologies for additive manufacturingFu, Yun-Fei; Rolfe, Bernard; Chiu, Louis N. S.; Wang, Yanan; Huang, Xiaodong; Ghabraie, Kazem20192019, vol.14, no.4
Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modellingKhan, Sohaib Z.; Masood, S. H.; Ibrahim, Essam; Ahmad, Zaini20192019, vol.14, no.4
Effects of TiO2 doping on microstructure and properties of directed laser deposition alumina/aluminum titanate compositesWu, Dongjiang; Niu, Fangyong; Ma, Guangyi; Yan, Shuai; Huang, Yunfei; Li, Chaojiang; Din, Jun20192019, vol.14, no.4
EditorialChua, Chee Kai20192019, vol.14, no.4
A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4VKhorasani, Amir Mahyar; Gibson, Ian; Ghasemi, AmirHossein; Ghaderi, Alireza20192019, vol.14, no.4
The influence of slicing parameters on the multi-material adhesion mechanisms of FDM printed parts: an exploratory studyTamburrino, Francesco; Graziosi, Serena; Bordegoni, Monica20192019, vol.14, no.4
Research progress of ceramic matrix composite parts based on additive manufacturing technologyLu, Zhongliang; Cao, Jiwei; Song, Zhaoqiang; Li, Dichen; Lu, Bingheng20192019, vol.14, no.4
Numerical and experimental assessment of the mechanical properties of 3D printed 18-Ni300 steel trabecular structures produced by Selective Laser Melting - a lean design approachConcli, Franco; Gilioli, Andrea20192019, vol.14, no.3
123