期刊


ISSN0954-4054
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报B辑:工程制造杂志
收藏年代1995~2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2018, vol.232, no.1 2018, vol.232, no.10 2018, vol.232, no.11 2018, vol.232, no.12 2018, vol.232, no.13 2018, vol.232, no.14
2018, vol.232, no.2 2018, vol.232, no.3 2018, vol.232, no.4 2018, vol.232, no.5 2018, vol.232, no.6 2018, vol.232, no.7
2018, vol.232, no.8 2018, vol.232, no.9

题名作者出版年年卷期
Finite element analysis of residual stress evolution with multiple impacts on one point in ultrasonic impact treatment processHu, Shengsun; Guo, Chaobo; Wang, Dongpo; Wang, Zhijiang; Huang, Chao20182018, vol.232, no.7
Geometric error compensation method based on Floyd algorithm and product of exponential screw theoryCheng, Qiang; Sun, Bingwei; Liu, Zhifeng; Feng, Qiunan; Gu, Peihua20182018, vol.232, no.7
Material microstructure effects in micro-endmilling of Cu99.9EOlejnik, L.; Rosochowski, A.; Elkaseer, A. M.; Dimov, S. S.; Pham, D. T.; Popov, K. P.20182018, vol.232, no.7
Effects of cutting parameters on drilling performance of carbon black-reinforced polymer compositeUysal, Alper20182018, vol.232, no.7
Development and growth time optimization of boron-doped micro-crystalline, undoped micro-crystalline and undoped nano-crystalline composite diamond filmWang, Xinchang; Wang, Chengchuan; Sun, Fanghong20182018, vol.232, no.7
Off-line error compensation in corner milling processYue, Caixu; Liu, Xianli; Liang, Steven Y.; Ding, Yunpeng20182018, vol.232, no.7
Investigations into the mechanical, morphological and thermal analyses of friction stir processing of high-density polyethylene compositesGao, Jicheng; Li, Chao; Shen, Yifu20182018, vol.232, no.7
The effect of monolayer TiCN-, AlTiN-, TiAlN-and two layers TiCN plus TiN- and AlTiN plus TiN-coated cutting tools on tool wear, cutting force, surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloyKuram, Emel20182018, vol.232, no.7
Fabrication of copper substrates for surface-enhanced Raman scattering using the microscratching methodZhang, Jingran; Yan, Yongda; Hu, Zhenjiang; Zhao, Xuesen20182018, vol.232, no.7
Effect of ultrasonic vibration on frictional behavior of tool-chip interface: Finite element analysis and experimental studyLotfi, Mohammad; Amini, Saeid20182018, vol.232, no.7
12