期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997~2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2016, vol.346/347 2016, vol.348/349 2016, vol.350/351 2016, vol.352/353 2016, vol.354/355 2016, vol.356/357
2016, vol.358/359 2016, vol.360/361 2016, vol.362/363 2016, vol.364/365 2016, vol.366/367 2016, vol.368/369

题名作者出版年年卷期
Friction reduction mechanisms in cast iron sliding against DLC: Effect of biofuel (E85) diluted engine oilBanerji, A.; Lukitsch, M. J.; Alpas, A. T.20162016, vol.368/369
Effect of normal force on fretting wear behavior and mechanism of Alloy 690TT in high temperature waterXin, L.; Yang, B. B.; Wang, Z. H.; Li, J.; Lu, Y. H.; Shoji, T.20162016, vol.368/369
A study of debris and wear damage resulting from fretting of Incoloy 800 steam generator tubes against AISI Type 304 stainless steelSoria, S. R.; Tolley, A.; Yawny, A.20162016, vol.368/369
An FEM-based approach for tool wear estimation in machiningMalakizadi, Amir; Gruber, Hans; Sadik, Ibrahim; Nyborg, Lars20162016, vol.368/369
Laboratory investigation of ability of oil-based friction modifiers to control adhesion at wheel-rail interfaceGalas, Radovan; Omasta, Milan; Krupka, Ivan; Hartl, Martin20162016, vol.368/369
Development of methodologies for sliding wear measurement on liners and flexible riser pipesde Moraes, M. A. F.; Bertholdi, J.; Arencibia, R. V.; Ramos Neto, F. F.; Franco, S. D.20162016, vol.368/369
Response to "Comments on the article: Erosive wear of various stainless steel grades used a impeller blade materials in high temperature impeller blade materials in high temperature aqueous slurry" by I. FortLindgren, M.; Suihkonen, R.; Vuorinen, J.20162016, vol.368/369
Evaluation of the effect of temperature on mechanical properties and wear resistance of polyurethane elastomersAshrafizadeh, H.; Mertiny, P.; McDonald, A.20162016, vol.368/369
Influence of tool surface topography on the material transfer tendency and tool wear in the turning of 316L stainless steelSaketi, S.; Ostby, J.; Olsson, M.20162016, vol.368/369
Effects of sliding speed and testing temperature on the tribological behavior of a nickel-alloy based solid-lubricating compositeZhen, Jinming; Zhu, Shengyu; Cheng, Jun; Qiao, Zhuhui; Liu, Weimin; Yang, Jun20162016, vol.368/369
123456