期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997～2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2016, vol.346/347 2016, vol.348/349 2016, vol.350/351 2016, vol.352/353 2016, vol.354/355 2016, vol.356/357
2016, vol.358/359 2016, vol.360/361 2016, vol.362/363 2016, vol.364/365 2016, vol.366/367 2016, vol.368/369

题名作者出版年年卷期
A simple, fast and low-cost method for in situ monitoring of topographical changes and wear rate of a complex tribo-system under mixed lubricationMeylan, B.; Dogan, P.; Sage, D.; Wasmer, K.20162016, vol.364/365
Effect of wear of diamond wire on surface morphology, roughness and subsurface damage of silicon wafersKumar, Arkadeep; Kaminski, Steffi; Melkote, Shreyes N.; Arcona, Chris20162016, vol.364/365
A numerical investigation of wear caused by dilute slurry injected into an annulus through rectangular aperturesPerelstein, Yuri; Gutmark, Ephraim20162016, vol.364/365
Semi-analytical and numerical analysis of sliding asperity interaction for power-law hardening materialsZhao, Bin; Zhang, Song; Keer, Leon M.20162016, vol.364/365
Evaluating hip implant wear measurements by CMM techniqueUddin, M. S.; Mak, C. Y. E.; Callary, S. A.20162016, vol.364/365
Cavitation erosion mechanisms in stainless steels and in composite metal-ceramic HVOF coatingsTaillon, Gabriel; Pougoum, Fabrice; Lavigne, Sebastien; Ton-That, Laurent; Schulz, Robert; Bousser, Etienne; Savoie, Sylvio; Martinu, Ludvik; Klemberg-Sapieha, Jolanta-Ewa20162016, vol.364/365
An experimental and theoretical study of surface rolling contact fatigue damage progression in hybrid bearings with artificial dentsVieillard, C.; Kadin, Y.; Morales-Espejel, G. E.; Gabelli, A.20162016, vol.364/365
Quantification of cylinder bores almost 'zero-wear'Obara, R. B.; Sinatora, A.20162016, vol.364/365
The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of siliconMir, Amir; Luo, Xichun; Sun, Jining20162016, vol.364/365
Investigation on the mechanisms of white etching crack (WEC) formation in rolling contact fatigue and identification of a root cause for bearing premature failureLai, Junbiao; Stadler, Kenred20162016, vol.364/365
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024