期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997~2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2016, vol.346/347 2016, vol.348/349 2016, vol.350/351 2016, vol.352/353 2016, vol.354/355 2016, vol.356/357
2016, vol.358/359 2016, vol.360/361 2016, vol.362/363 2016, vol.364/365 2016, vol.366/367 2016, vol.368/369

题名作者出版年年卷期
Degradation of wire electrode during electrical discharge machining of metal matrix compositesPramanik, A.; Basak, A. K.20162016, vol.346/347
Fundamental study on early detection of seizure in journal bearing by using acoustic emission techniqueHase, Alan; Mishina, Hiroshi; Wada, Masaki20162016, vol.346/347
Application of 2D finite element analysis to compare cracking behaviour in twin-disc tests and full scale wheel/rail experimentsTrummer, G.; Daves, W.; Kracalik, M.20162016, vol.346/347
Friction and wear of a hybrid surface texturing of polyphenylene sulfide-filled microporesCho, Minhaeng20162016, vol.346/347
Wear and scratch behaviour of electroless Ni-P-nano-TiO2: Effect of surfactantsRajendran, R.; Shankar, M. Siva; Sanjith, U.; Tamilarasan, T. R.; Rajagopal, G.; Sudagar, J.20162016, vol.346/347
Increasing the coefficient of sliding friction of NiCr at low loads by interstitial surface hardeningKahn, H.; Ernst, F.; Heuer, A. H.20162016, vol.346/347
Temperature-dependent fretting damage of high strength stainless steel sheetsHirsch, Michael R.; Neu, Richard W.20162016, vol.346/347
Evolution of wear damage in Inconel 600 alloy due to fretting against type 304 stainless steelLi, J.; Ma, M.; Lu, Y. H.; Xin, L.20162016, vol.346/347
Abrasive and erosive wear behaviour of nanometric WC-12Co microwave cladsZafar, Sunny; Sharma, Apurbba Kumar20162016, vol.346/347
Experimental and numerical studies of bolted joints subjected to axial excitationLiu, Jianhua; Ouyang, Huajiang; Peng, Jinfang; Zhang, Chaoqian; Zhou, Pingyu; Ma, Lijun; Zhu, Minhao20162016, vol.346/347
12