国家工程技术图书馆第一分馆 | 机械分馆 | 机械工业信息研究院 | library.gmachineinfo.com

期刊

全部

2015, vol.30, no.1/2	2015, vol.30, no.3/4	2015, vol.30, no.5/6	2015, vol.31, no.1/2	2015, vol.31, no.3/4	2015, vol.31, no.5/6
2015, vol.32, no.1/2	2015, vol.32, no.3/4	2015, vol.32, no.5/6

题名	作者	出版年	年卷期
Microstructure and Mechanical Properties of High Power CO2 Laser Welded Inconel 625 Nickel Based Alloy	Li, G.; Huang, J.; Wu, Y-X.	2015	2015, vol.32, no.3/4
Closed Form Solution for Temperature Rise in a Two Layer Assembly During Laser Step Input Pulse Heating with the Presence of Convection Cooling at Surface	Ylbas, B. S.; Ali, H.	2015	2015, vol.32, no.3/4
Laser Tracker Technology for Static Monitoring of Civil Infrastructure	Barazzetti, L.; Giussani, A.; Previtali, M.; Roncoroni, F.	2015	2015, vol.32, no.3/4
Semi-analytical Solution of the Thermal Field Distribution in a Semiconductor Under Simultaneous Irradiation by Three Laser Beams	Oane, M.; Peled, A.; Toader, D.; Sufaru, L.; Mursa, P.; Ticos, C. M.	2015	2015, vol.32, no.3/4
Monitoring of Cover Slide Degradation During Fibre Laser Cladding	Valsecchi, B.; Previtali, B.	2015	2015, vol.32, no.3/4
Use of Airborne Laser Scanning Data and Image-based Three-dimensional (3-D) Edges for Automated Planar Roof Reconstruction	Demir, N.	2015	2015, vol.32, no.3/4
Experimental and Thermodynamic Analysis of Laser Clad Cr3C2/Ni Coatings on a Ti6Al4V Substrate Produced with Different Incident Laser Powers	Lei, Y-W.; Sun, R-L.; Tang, Y.; Niu, W.	2015	2015, vol.32, no.3/4
Effect of Ti/Si Ratio on the Synthesized Products of Laser Ignited Self-propagating High-temperature Synthesis (SHS) in an Al-Ti-Si System	Li, Y. X.; Bai, P. K.; Wang, J. H.; Liu, B.; Lu, Q.; Jiang, L. T.	2015	2015, vol.32, no.3/4