期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997~2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2013, vol.297, no.1/2 2013, vol.298/299 2013, vol.300, no.1/2 2013, vol.301, no.1/2 2013, vol.302, no.1/2 2013, vol.303, no.1/2
2013, vol.304, no.1/2 2013, vol.305, no.1/2 2013, vol.306, no.1/2 2013, vol.307, no.1/2 2013, vol.308, no.1/2

题名作者出版年年卷期
Criteria and properties of the asperity peaks on 3D engineering surfacesM. Kalin; A. Pogacnik20132013, vol.308, no.1/2
Abrasive wear mechanisms and their relation to rock propertiesM. Petrica; E. Badisch; T. Peinsitt20132013, vol.308, no.1/2
Effects of hard water on tribological properties of DLC rubbed against stainless steel and brassM. Uchidate; H. Liu; K. Yamamoto; A. Iwabuchi20132013, vol.308, no.1/2
Influence of different polishing conditions on the skid resistance development of asphalt surfaceDawei Wang; Xianhua Chen; Chaoen Yin; Markus Oeser; Bernhard Steinauer20132013, vol.308, no.1/2
Unlubricated sliding friction and wear characteristics of thermally oxidized commercially pure titaniumR. Bailey; Y. Sun20132013, vol.308, no.1/2
A hybrid apparatus for friction and accelerated wear testing of total knee replacement bearing materialsAnthony Chyr; Anthony P. Sanders; Bart Raeymaekers20132013, vol.308, no.1/2
Three-body abrasive wear of fine pearlite, nanostructured bainite and martensiteS. Das Bakshi; P. H. Shipway; H. K. D. H. Bhadeshia20132013, vol.308, no.1/2
Rolling contact fatigue resistance of PVD CrN and TiN coated austempered ductile ironDiego Alejandro Colombo; Maria Dolores Echeverria; Sebastian Laino; Ricardo Cesar Dommarco; Juan Miguel Massone20132013, vol.308, no.1/2
Friction-induced intermittent motion affected by surface roughness of brake friction materialsS. M. Lee; M. W. Shin; H. Jang20132013, vol.308, no.1/2
Multi-scale friction modelling for rough contacts under sliding conditionsD. K. Karupannasamy; M. B. de Rooij; D. J. Schipper20132013, vol.308, no.1/2
12345678910...