期刊


ISSN0944-6524
刊名Production Engineering
参考译名生产工程
收藏年代2008～2024



全部

2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023 2024

2012, vol.6, no.1 2012, vol.6, no.2 2012, vol.6, no.3 2012, vol.6, no.4/5 2012, vol.6, no.6

题名作者出版年年卷期
Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperatureB. Denkena; J. Kohler; Mesfin Sisay Mengesha20122012, vol.6, no.4/5
Development of a warm cross wedge rolling process using FEA and downsized experimental trialsHanns Kache; Malte Stonis; Bernd-Arno Behrens20122012, vol.6, no.4/5
A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cuttingHendrik Puls; Fritz Klocke; Dieter Lung20122012, vol.6, no.4/5
Process design space for optimal surface integrity in finish hard milling of tool steelS. Zhang; W. Li; Y. B. Guo20122012, vol.6, no.4/5
Residual stresses in surface layer after dry and MQL turning of AISI 316L steelTadeusz Leppert; Ru Lin Peng20122012, vol.6, no.4/5
Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steelS. Zhang; T. C. Ding; J. F. Li20122012, vol.6, no.4/5
The non-hydrostatic response of polymer melts as a pressure medium in sheet metal formingA. E. Tekkaya; M. M. Hussain; J. Witulski20122012, vol.6, no.4/5
Simulation of personnel requirements during production ramp-upGisela Lanza; Anna Sauer20122012, vol.6, no.4/5
Flank milling of compliant workpieces with chamfered toolsB. Denkena; W. Bickel; V. Sellmeier20122012, vol.6, no.4/5
Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualitiesKatrin Nothhaft; Joungsik Suh; Matthias Golle; Ingrid Picas; Daniel Casellas; Wolfram Volk20122012, vol.6, no.4/5
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024