期刊


ISSN0043-1648
刊名Wear
参考译名磨损
收藏年代1997~2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2012, vol.274/275 2012, vol.276/277 2012, vol.278/279 2012, vol.280/281 2012, vol.282/283 2012, vol.284/285
2012, vol.286/287 2012, vol.288 2012, vol.289 2012, vol.290/291 2012, vol.292/293 2012, vol.294/295
2012, vol.296, no.1/2

题名作者出版年年卷期
High speed sliding wear behavior of recycled WC_P-reinforced ferrous matrix composites fabricated by centrifugal castYanpei Song; Huigai Wang20122012, vol.276/277
Mechanical stability under sliding contact of thin silver film embedded in brittle multilayerX. Geng; Z. Zhang; E. Barthel; D. Dalmas20122012, vol.276/277
Predicting the material loss around a hole due to sand erosionChong Y. Wong; Christopher Solnordal; Anthony Swallow; Steven Wang; Lachlan Graham; Jie Wu20122012, vol.276/277
The importance of sampling interval for rough contact mechanicsP. Pawlus; W. Zelasko20122012, vol.276/277
Contact fatigue performance of helical gears with surface coatingsV. Moorthy; B. A. Shaw20122012, vol.276/277
Parametric effects on the erosion-corrosion rate and mechanism of carbon steel pipes in oil sands slurryY. Yang; Y. F. Cheng20122012, vol.276/277
Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materialsM. R. Thakare; J. A. Wharton; R. J. K. Wood; C. Menger20122012, vol.276/277
Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatingsGiovanni Bolelli; Benedetta Bonferroni; Jussi Laurila; Luca Lusvarghi; Andrea Milanti; Kari Niemi; Petri Vuoristo20122012, vol.276/277
Influence of contact pressure and boundary films on the frictional behaviour and on the roughness changes of galvanized steel sheetsG. R. Payen; E. Felder; M. Repoux; J. M. Mataigne20122012, vol.276/277
Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloyR. Figueroa; C. M. Abreu; M. J. Cristobal; G. Pena20122012, vol.276/277
12