期刊


ISSN1087-1357
刊名Journal of manufacturing science and engineering
参考译名制造科学与工程杂志
收藏年代1995～2024



全部

1995 1997 1998 1999 2000 2001
2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2024

2011, vol.133, no.1 2011, vol.133, no.2 2011, vol.133, no.3 2011, vol.133, no.4 2011, vol.133, no.5 2011, vol.133, no.6

题名作者出版年年卷期
A Heat Transfer Model Based on Finite Difference Method for GrindingBin Shen; Albert J. Shih; Guoxian Xiao20112011, vol.133, no.3
Research on Yarn Tension Modeling in Carpet Tufting Equipment SystemXu Yang; Sun Zhijun; Meng Zhuo; Sun Yize; Chen Guangfeng20112011, vol.133, no.3
Investigation of Inner Surface Groove Formation Under Radially Inward Pressure During Immersion Precipitation-Based Hollow Fiber Membrane FabricationJun Yin; Nicole Coutris; Yong Huang20112011, vol.133, no.3
Two-Sided Quadratic Model for Workpiece Fixturing AnalysisChen Luo; LiMin Zhu; Han Ding20112011, vol.133, no.3
Numerical Integration Method for Prediction of Milling StabilityYe Ding; LiMin Zhu; XiaoJian Zhang; Han Ding20112011, vol.133, no.3
Experimental Study and Modeling of Lapping Using Abrasive Grits with Mixed SizesChunhui Chung; Chad S. Korach; Imin Kao20112011, vol.133, no.3
Process Factors Influence on Cavity Pressure Behavior in Microinjection MouldingC. A. Griffiths; S. S. Dimov; S. Scholz; H. Hirshy; G. Tosello20112011, vol.133, no.3
The Identification of the Key Enablers for Force Control of Robotic Friction Stir WeldingWilliam R. Longhurst; Alvin M. Strauss; George E. Cook20112011, vol.133, no.3
Self-Piercing Riveting of Wrought Magnesium AZ31 SheetsJ. W. Wang; Z. X. Liu; Y. Shang; A. L. Liu; M. X. Wang; R. N. Sun; Pei-Chung Wang20112011, vol.133, no.3
Selection of Bending Parameters for Minimal Spring-Back Using an ANFIS Model and Simulated Annealing AlgorithmH. Baseri; B. Rahmani; M. Bakhshi-Jooybari20112011, vol.133, no.3
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024