期刊


ISSN1059-9495
刊名Journal of Materials Engineering and Performance
参考译名材料工程与特性杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2010, vol.19, no.1 2010, vol.19, no.2 2010, vol.19, no.3 2010, vol.19, no.4 2010, vol.19, no.5 2010, vol.19, no.6
2010, vol.19, no.7 2010, vol.19, no.8 2010, vol.19, no.9

题名作者出版年年卷期
Stress-Strain Behaviors Simulation of High Chromium Steel at Elevated TemperaturesLigang Liu; Qiang Li; Bo Liao; Yukui Gao; Yuhui Wang; Xuejun Ren; Qingxiang Yang20102010, vol.19, no.7
Inverse Analysis of Rapid and Localized Energy DepositionS. G. Lambrakos; J. G. Michopoulos20102010, vol.19, no.7
An Analytical Modified Model of Clad Sheet Bonding by Cold Rolling Using Upper Bond TheoremH. Pishbin; M. H. Parsa; A. Dastvareh20102010, vol.19, no.7
Modeling of the Weld Shape Development During the Autogenous Welding Process by Coupling Welding Arc with Weld PoolWenchao Dong; Shanping Lu; Dianzhong Li; Yiyi Li20102010, vol.19, no.7
Effect of Hot Deformation on the Nitride Precipitation Behavior in High Nitrogen Austenitic SteelZhenhua Wang; Wantang Fu; Shuhua Sun; Deli Zhao; Guoli Zhang; Wenhui Zhang; Minggui Qv20102010, vol.19, no.7
Investigations on the Effects of the Tool Material, Geometry, and Tilt Angle on Friction Stir Welding of Pure TitaniumK. Reshad Seighalani; M. K. Besharati Givi; A. M. Nasiri; P. Bahemmat20102010, vol.19, no.7
Welding Characteristics of Ultrahigh Strength Steel in Annealed and Quench-Tempered ConditionsA. Roshanghias; M. Barzegari; A. H. Kokabi; H. R. Madaah Hosseini20102010, vol.19, no.7
Corrosion Properties of NdFeB Magnets Coated by a Ni/Cu/Ni Layer in Chloride and Sulfide EnvironmentsI. Rampin; F. Bisaglia; M. Dabala20102010, vol.19, no.7
Structure and Property Studies on Austempered and As-Cast Ausferritic Gray Cast IronsAravind Vadiraj; G. Balachandran; M. Kamaraj20102010, vol.19, no.7
Corrosion of Bare and Galvanized Mild Steel in Arabian Gulf EnvironmentH. Saricimen; A. Ahmad; A. Quddus; A. Aksakal; A. Ul-Hamid; T. A. Siddique20102010, vol.19, no.7
123