期刊


ISSN1059-9495
刊名Journal of Materials Engineering and Performance
参考译名材料工程与特性杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2010, vol.19, no.1 2010, vol.19, no.2 2010, vol.19, no.3 2010, vol.19, no.4 2010, vol.19, no.5 2010, vol.19, no.6
2010, vol.19, no.7 2010, vol.19, no.8 2010, vol.19, no.9

题名作者出版年年卷期
Evaluation of Strength for Borosilicate Glass Coated with Ceramic Materials by SputteringToshihiko Hoshide; Masato Hirano20102010, vol.19, no.4
An Investigation into the Effect of Alloying Elements on the Recrystallization Behavior of 70/30 BrassA. Shafiei, M.; A. Roshanghias; H. Abbaszadeh; G. H. Akbari20102010, vol.19, no.4
Correlation Between Hardness Measurements and Remaining Life Prediction for 2.25Cr-1Mo Steel Used in Power PlantsH. C. Furtado; L. H. de Almeida; J. Dille; I. Le May20102010, vol.19, no.4
Kinetics of Failure Rate Accumulation and TiNi Shape Memory Effect Alloy Fracture Under Mechanical CyclingA. B. Bondarev; M. A. Khusainov; G. V. Plastilina; V. A. Andreev20102010, vol.19, no.4
Microstructural Observations in a Cast Al-Si-Cu/TiC CompositeA. E. Karantzalis; A. Lekatou; E. Georgatis; V. Poulas; H. Mavros20102010, vol.19, no.4
The Effects of Martensite Content on the Mechanical Properties of Quenched and Tempered 0.2%C-Ni-Cr-Mo SteelsJohn M. Tartaglia20102010, vol.19, no.4
The Effect of Dynamic Strain Aging on Subsequent Mechanical Properties of Dual-Phase SteelsM. J. Molaei; A. Ekrami20102010, vol.19, no.4
Characterization of Atmospheric Corrosion of 2A12 Aluminum Alloy in Tropical Marine EnvironmentT. Li; X. G. Li; C. F. Dong; Y. F. Cheng20102010, vol.19, no.4
Cut Front Geometry Characterization in Cutting Applications of Brass with Abrasive Water JetAdnan Akkurt20102010, vol.19, no.4
Microstructure and Tensile Properties of Nanostructured and Ultrafine Grained FeMoB Alloys Produced by Spark Plasma Sintering of Mechanically Alloyed PowdersCinzia Menapace; Stefano Libardi; Mirco D'Incau; Alberto Molinari20102010, vol.19, no.4
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024