期刊


ISSN1087-1357
刊名Journal of manufacturing science and engineering
参考译名制造科学与工程杂志
收藏年代1995～2024



全部

1995 1997 1998 1999 2000 2001
2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2024

2010, vol.132, no.1 2010, vol.132, no.2 2010, vol.132, no.3 2010, vol.132, no.4 2010, vol.132, no.5 2010, vol.132, no.6

题名作者出版年年卷期
Computational Study of the Effect of Governing Parameters on a Polymer Injection Molding Process for Single-Cavity and Multicavity Mold SystemsM. Tutar; A. Karakus20102010, vol.132, no.1
The Effect of Laser Beam Geometry on Cut Path Deviation in Diode Laser Chip-Free Cutting of GlassSalman Nisar; M. A. Sheikh; Lin Li; Andrew J. Pinkerton; Shakeel Safdar20102010, vol.132, no.1
Experimental Study on Viscosity and Phase Segregation of Al-Si Powders in Microsemisolid Powder FormingYufeng Wu; Gap-Yong Kim; Iver E. Anderson; Thomas A. Lograsso20102010, vol.132, no.1
Polymer Film Production: Modeling and Control of the Forward DrawC. R. MacLaine; P. Acarnley; J. Shanahan; P. Mousalli; M. Deighton20102010, vol.132, no.1
Focused Ion-Beam Based Nanohole Modeling, Simulation, Fabrication, and ApplicationJack Zhou; Guoliang Yang20102010, vol.132, no.1
The Impact of Surface Forces on Particle Flow and Membrane Fouling in the Microfiltration of Metalworking FluidsSeounghyun Ham; Shiv G. Kapoor; Richard E. DeVor; John Wentz20102010, vol.132, no.1
Automated Part Centering With Impulse ActuationS. J. Furst; T. A. Dow; K. Garrard; A. Sohn20102010, vol.132, no.1
Development Process for Custom Three-Dimensional Printing (3DP) Material SystemsBen R. Utela; Duane Storti; Rhonda L. Anderson; Mark Ganter20102010, vol.132, no.1
Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser AblationWenqian Hu; Yung C. Shin; Galen B. King20102010, vol.132, no.1
Melt Pool Temperature Control for Laser Metal Deposition Processes - Part I: Online Temperature ControlLie Tang; Robert G. Landers20102010, vol.132, no.1
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024