期刊


ISSN0890-6955
刊名International Journal of Machine Tools & Manufacture
参考译名国际机床与制造杂志
收藏年代1997~2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2006 2007 2008
2009 2010 2011 2012 2013 2014
2015 2016 2017 2018 2019 2020
2021 2022 2023 2024

2009, vol.49, no.1 2009, vol.49, no.10 2009, vol.49, no.11 2009, vol.49, no.12/13 2009, vol.49, no.14 2009, vol.49, no.15
2009, vol.49, no.2 2009, vol.49, no.3-4 2009, vol.49, no.5 2009, vol.49, no.6 2009, vol.49, no.7/8 2009, vol.49, no.9

题名作者出版年年卷期
Finite element modeling approaches in grindingD. A. Doman; A. Warkentin; R. Bauer20092009, vol.49, no.2
Research on formability of 5052 aluminum alloy sheet in a quasi-static-dynamic tensile processChunfeng Li; Dahai Liu; Haiping Yu; Zhengbo Ji20092009, vol.49, no.2
Machining performance of pearlitic-ferritic nodular cast iron with coated carbide and silicon nitride ceramic toolsW. Grzesik; J. Rech; K. Zak; C. Claudin20092009, vol.49, no.2
Abrasive waterjet peening with elastic prestress: A parametric evaluationB. Sadasivam; A. Hizal; D. Arola20092009, vol.49, no.2
Effect of tool geometry on static strength of friction stir spot-welded aluminum alloyH. Badarinarayan; Q. Yang; S. Zhu20092009, vol.49, no.2
Electrical discharge milling with oblong toolsI. J. Mikesic; R. V. Fleisig; P. Koshy20092009, vol.49, no.2
Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide millsT. Thepsonthi; M. Hamdi; K. Mitsui20092009, vol.49, no.2
Machining chatter simulation in multi-axis milling using graphical methodS. Khachan; F. Ismail20092009, vol.49, no.2
Sensor-based modeling of slurry chemistry effects on the material removal rate (MRR) in copper-CMP processU. Phatak; S. Bukkapatnam; Z. Kong; R. Komanduri20092009, vol.49, no.2
Some studies on high-pressure cooling in turning of Ti-6Al-4VA. K. Nandy; M. C. Gowrishankar; S. Paul20092009, vol.49, no.2
12