期刊


ISSN1350-6501
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报J辑:工程摩擦学杂志
收藏年代1995~2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2009, vol.223, no.3 2009, vol.223, no.4 2009, vol.223, no.5 2009, vol.223, no.6 2009, vol.223, no.8 2009, vol.223, no.J1
2009, vol.223, no.J2

题名作者出版年年卷期
Influence of counterbody material on fretting wear behaviour of uncoated and diamond-like carbon-coated Ti-6Al-4VS. Ganesh Sundara Raman; P. Navaneethakrishnan; R. Gnanamoorthy20092009, vol.223, no.J2
Applicability of cutting fluids with nanoparticle inclusion as coolants in machiningR. R. Srikant; D. N. Rao; M. S. Subrahmanyam; P. Vamsi Krishna20092009, vol.223, no.J2
Dynamic stiffness and damping characteristics of one-dimensional magneto-hydrodynamic inclined-plane slider bearingsJ. R. Lin; C. R. Hung; C. H. Hsu; C. Lai20092009, vol.223, no.J2
Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear, and surface roughnessR. R. Srikant; D. Nageswara Rao; P. N. Rao20092009, vol.223, no.J2
Experimental investigations on the influence of emulsifier content in cutting fluids on machined surfaceR. R. Srikant; D. Nageswara Rao; P. N. Rao20092009, vol.223, no.J2
Wear and frictional performance of betelnut fibre-reinforced polyester compositeN. Singh Gill; B. F. Yousif20092009, vol.223, no.J2
Surface coatings and finite-element analysis of layered fretting contactsG. K. Nikas; R. S. Sayles20092009, vol.223, no.J2
Analytical investigation of a partially textured parallel sliderM. D. Pascovici; T. Cicone; M. Fillon; M. B. Dobrica20092009, vol.223, no.J2
A method for determining the periodic solution and its stability of non-linear bearing-rotor system based on observed states of the systemY. J. Lu; H. Liu; R. Dai; Y. F. Zhang; L. Yu; Y. B. Yu20092009, vol.223, no.J2
Non-linearity in experimental journal bearing dynamics - a new approachG. D. Wale; D. Mba20092009, vol.223, no.J2
12345678910