期刊


ISSN1087-1357
刊名Journal of manufacturing science and engineering
参考译名制造科学与工程杂志
收藏年代1995～2024



全部

1995 1997 1998 1999 2000 2001
2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2024

2006, vol.128, no.1 2006, vol.128, no.2 2006, vol.128, no.3 2006, vol.128, no.4

题名作者出版年年卷期
Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model - Part II: Experimental Investigation and Model ValidationYuliu Zheng; Xuefei Hu; John W. Sutherland20062006, vol.128, no.3
Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model - Part I: Model DevelopmentYuliu Zheng; Xuefei Hu; John W. Sutherland20062006, vol.128, no.3
Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-CuttingKai Liu; Shreyes N. Melkote20062006, vol.128, no.3
Dynamic Material Behavior Modeling Using Internal State Variable Plasticity and Its Application in Hard Machining SimulationsY. B. Guo; Q. Wen; K. A. Woodbury20062006, vol.128, no.3
Microstructure-Level Model for the Prediction of Tool Failure in WC-Co Cutting Tool MaterialsSunghyuk Park; Shiv G. Kapoor; Richard E. DeVor20062006, vol.128, no.3
Toughness and Oblique MetalcuttingA. G. Atkins20062006, vol.128, no.3
The Constant Force Component due to Material Separation and Its Contribution to the Size Effect in Specific Cutting EnergySathyan Subbiah; Shreyes N. Melkote20062006, vol.128, no.3
Machining a Micro/Meso Scale Structure Using a Miniaturized Machine Tool by Using a Conventional Cutting ProcessJ. H. Lee; S. R. Park; S. H. Yang20062006, vol.128, no.3
Development of a Device for Measuring the Transverse Motion of a Saw-WireMasahiro Mizuno; Toshirou Iyama; Shinya Kikuchi; B. Zhang20062006, vol.128, no.3
A New Wire-Driven Three Degree-of-Freedom Parallel ManipulatorKeJun Ning; MingYang Zhao; Jie Liu20062006, vol.128, no.3
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024