期刊


ISSN1087-1357
刊名Journal of manufacturing science and engineering
参考译名制造科学与工程杂志
收藏年代1995～2024



全部

1995 1997 1998 1999 2000 2001
2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2024

2003, vol.125, no.1 2003, vol.125, no.2 2003, vol.125, no.3 2003, vol.125, no.4

题名作者出版年年卷期
Influence of Exit Surface Angle on Drilling Burr FormationSangkee Min; David A. Dornfeld; Yohichi Nakao20032003, vol.125, no.4
Measurements and Simulations of Temperature and Deformation Fields in Transient Metal CuttingYogesh K. Potdar; Alan T. Zehnder20032003, vol.125, no.4
Extension of Oxley's Analysis of Machining to Use Different Material ModelsAmir H. Adibi-Sedeh; Vis Madhavan; Behnam Bahr20032003, vol.125, no.4
Experimental Cutting Tool Temperature DistributionsMark R. Miller; George Mulholland; Charles Anderson20032003, vol.125, no.4
The Effect of Preheating of Work Material on Chatter During End Milling of Medium Carbon Steel Performed on a Vertical Machining Center (VMC)A. K. M. N. Amin; M. Abdelgadir20032003, vol.125, no.4
Modeling Forces Including Elastic Recovery for Internal Thread FormingSameer Chowdhary; Richard E. DeVor; Shiv G. Kapoor20032003, vol.125, no.4
Thermophysical-Property-Based Selection of Tool Protective Coatings for Dry Machining of SteelsWit Grzesik; Piotr Nieslony20032003, vol.125, no.4
Prediction of Coolant Pressure and Volume Flow Rate in the Gundrilling ProcessJinhyuk Jung; Jun Ni20032003, vol.125, no.4
The Effect of Chip Adsorption on Selective Depletion From a Multi-Component Synthetic Metalworking FluidJoseph J. Eppert; Richard E. DeVor; Shiv G. Kapoor; N. Rajagopalan20032003, vol.125, no.4
A Curvilinear Tool-Path Method for Pocket MachiningMichael B. Bieterman; Donald R. Sandstrom20032003, vol.125, no.4
123



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024