期刊


ISSN1087-1357
刊名Journal of manufacturing science and engineering
参考译名制造科学与工程杂志
收藏年代1995～2024



全部

1995 1997 1998 1999 2000 2001
2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2024

2002, vol.124, no.1 2002, vol.124, no.2 2002, vol.124, no.3 2002, vol.124, no.4

题名作者出版年年卷期
A Model for Predicting the Heat Flow into the Workpiece in Dry DrillingMatthew Bono; Jun Ni20022002, vol.124, no.4
Drilling of Aramid and Carbon Fiber Polymer CompositesM. S. Won; C. K. H. Dharan20022002, vol.124, no.4
Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 1: FEM Modeling of Fly Hobbing and Computational Interpretation of Experimental ResultsA. Antoniadis; N. Vidakis; N. Bilalis20022002, vol.124, no.4
Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 2: The Effect of Cutting Parameters on the Level of Tool Stresses - A Quantitative Parametric AnalysisA. Antoniadis; N. Vidakis; N. Bilalis20022002, vol.124, no.4
Analysis of Sound Signal Generation Due to Flank Wear in TurningMing-Chyuan Lu; Elijah Kannatey-Asibu, Jr.20022002, vol.124, no.4
An Experimental Study on Fatigue Life Variance, Residual Stress Variance, and Their Correlation of Face-Turned and Ground Ti 6Al-4V SamplesXiaoping Yang; C. Richard Liu; A. F. Grandt20022002, vol.124, no.4
Machinability of Pearlitic Cast Iron With Cubic Boron Nitride (CBN) Cutting ToolsJiancheng Liu; Kazuo Yamazaki; Hiroyuki Ueda; Norihiko Narutaki; Yasuo Yamane20022002, vol.124, no.4
Modeling of Residual Stress in Grinding of Nodular Cast IronGuoxian Xiao; Robin Stevenson; Ihab M. Hanna; Scott A. Hucker20022002, vol.124, no.4
Machining Quality and Cost: Estimation and TradeoffsPanicos Nicolaou; Deborah L. Thurston; James V. Carnahan20022002, vol.124, no.4
Hydrodynamic Physical Modeling of Laser DrillingD. K. Y. Low; L. Li; P. J. Byrd20022002, vol.124, no.4
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024