期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2002, vol.19, no.1 2002, vol.19, no.10 2002, vol.19, no.11 2002, vol.19, no.12 2002, vol.19, no.2 2002, vol.19, no.3
2002, vol.19, no.4 2002, vol.19, no.5 2002, vol.19, no.6 2002, vol.19, no.7 2002, vol.19, no.8 2002, vol.19, no.9
2002, vol.20, no.1 2002, vol.20, no.10 2002, vol.20, no.11 2002, vol.20, no.12 2002, vol.20, no.2 2002, vol.20, no.3
2002, vol.20, no.4 2002, vol.20, no.5 2002, vol.20, no.6 2002, vol.20, no.7 2002, vol.20, no.8 2002, vol.20, no.9

题名作者出版年年卷期
Effect of bearing surroundings on the high-speed spindle-bearing complianceS. M. Kim; S. K. Lee; K. J. Lee20022002, vol.19, no.8
A linear cross-coupled control system for high-speed machiningQ. Zhong; Y. Shi; J. Mo; S. Huang20022002, vol.19, no.8
The application of an ANFIS and grey system method in turning tool-failure detectionS. P. Lo20022002, vol.19, no.8
Elimination of setting error due to clamping forces in on-machine measurementS. H. Kim; T. J. Ko; J. H. Ahn20022002, vol.19, no.8
Local mesh decimation for view-independent three-axis NC milling simulationS. H. Lee; K. S. Lee20022002, vol.19, no.8
Influence of punch radius and angle on the outward curling process of tubesYou-Min Huang; Yuung Ming Huang20022002, vol.19, no.8
Influence of cone semi-angle on the formability limitation of the hole-flanging processY. M. Huang; K. H. Chien20022002, vol.19, no.8
Inspection planning strategy for the on-machine measurement process based on CAD/CAM/CAI integrationM. W. Cho; T. I. Seo20022002, vol.19, no.8
On-line monitoring of PVC foam density using ultrasound waves and artificial neural networksN. H. Abu-Zahra; S. Karimi20022002, vol.19, no.8
Process quality analysis of productsK. S. Chen; S. C. Chen; R. K. Li20022002, vol.19, no.8