期刊


ISSN1364-0461
刊名International Journal Cast Metals Research
参考译名国际铸造金属研究杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2000, vol.12, no.5 2000, vol.12, no.6 2000, vol.13, no.1 2000, vol.13, no.2 2000, vol.13, no.3 2000, vol.13, no.4

题名作者出版年年卷期
The fracture behaviour of A356 alloys with different iron contents under resonant vibrationJ. H. Horng; D. S. Jiang; T. S. Liu; L. H. Chen20002000, vol.13, no.4
Optimisation of heat transfer between casting and mouldM. T. Manzari; D. T. Gethin; R. W. Lewis20002000, vol.13, no.4
Heat generation and heat transfer during reactive joining of NiAl to steelK. Ohsasa; K. Matsuura; H. Jinmon; T. Narita; M. Kudoh20002000, vol.13, no.4
Effect of growth rate on macrosegregation during directional solidification of a Pb-Sb alloyS. N. Ojha; S. N. Tewari20002000, vol.13, no.4
Effect of cooling rate and Sr-modification on porosity and Fe-intermetallics formation in Al-6.5% Si-3.5% Cu-Fe alloysA. M. Samuel; A. Pennors; C. Villeneuve; F. H. Samuel; H. W. Doty; S. Valtierra20002000, vol.13, no.4
Direct observation of the effect of strontium on porosity formation during the solidification of aluminum-silicon alloysP. D. Lee; S. Sridhar20002000, vol.13, no.4
The rheological properties and hot tearing behaviour of an Al-Cu alloyLiangyi Zhao; Baoyin; Na Wang; V. Sahajwalla; R. D. Pehlke20002000, vol.13, no.3
Precipitation of primary intermetallic compounds in liquid Al 11.5Si 0.4Mg alloyX. Cao; J. Campbell20002000, vol.13, no.3
Moulding characteristics of sand mixture with partial vacuum suction techniquesS. Ji; Z. Fan; L. Wan; J. Zhang20002000, vol.13, no.3
Hot tearing in 319 alloyF. Paray; B. Kulunk; J. E. Gruzleski20002000, vol.13, no.3
12345