期刊


ISSN1059-9495
刊名Journal of Materials Engineering and Performance
参考译名材料工程与特性杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

1998, vol.7, no.1 1998, vol.7, no.2 1998, vol.7, no.3 1998, vol.7, no.4 1998, vol.7, no.5 1998, vol.7, no.6

题名作者出版年年卷期
Application of positron annihilation spectroscopy to study recovery and recrystallization of commercial pure al and Al-1Wt% Mn alloysM. S. Abd EI Keriem; M. Mohsen; M. H. Khalil; M. Abd El Wahab; A. S. Taha19981998, vol.7, no.5
Characterization of seven power-generating turbine rotors using microscopy-based techniquesD. R. G. Mitchell; C. J. Moss19981998, vol.7, no.5
Effect of processing parameters on the elastic deflection of P/M Ni-Fe36Ni bimetal strips during heatingC. -C. Liu; W. -F. Wang19981998, vol.7, no.5
Hardness, microstructure and surface characterization of laser gas nitrided commercially pure titanium using high power CO{sub}2 laserJ. Senthil Selvan; K. Subramanian; A. K. Nath; A. K. Gogia; A. K. Balamurugan; S. Rajagopal19981998, vol.7, no.5
Heat transfer coefficient on external mold surface at high pressure and application to metal-matrix composite castingJ. Yang; O. J. Ilegbusi19981998, vol.7, no.5
Hot and cold rolling of high nitrogen Cr-Ni and Cr-Mn austenitic stainless steelsR. Ilola; H. Hanninen; T. Kauppi19981998, vol.7, no.5
Influence of roll and solution treatment processing on shape memory effect of Fe-14Mn-5Si-9Cr-5Ni alloyC. L. Li; Z. H. Jin19981998, vol.7, no.5
Low-Cycle impact fatigue of SiC{sub}w/7475AI compositeP. Yang; Y. Liu; F. Xu19981998, vol.7, no.5
Penetration in spot GTA welds during centrifugationD. K. Aidun; S. A. Martin19981998, vol.7, no.5
Preparation and processing of rare earth chalcogenidesK. A. Gschneidner; Jr.19981998, vol.7, no.5
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024