Assembly and accumulation section for gate valves
参考中译:闸门阀组装和积聚部分


          

刊名：Design Solutions
作者：Rachael Morling
刊号：780C0057
ISSN：1740-2654
出版年：2024
年卷期：2024, no.Feb.
页码：19
总页数：1
分类号：TH12
语种：eng
文摘：A customer required a pallet transfer system for the production of gate valves for water pipes, on which the valves could be assembled and buffered. The system needed to transport the valves to the customer's dipping station where they would be checked for leaks. Three valves are processed on each pallet, making a total weight of up to 250 kg per pallet. The pallets had to have the option to be stopped at the assembly stations. The conveying path needed to be at an ergonomic working height and be secured in accordance with accident prevention regulations (UVV). Solution from mk. The transfer system supplied by mk was constructed out of chain conveyors and accumulating roller chain conveyors. The profile series used was selected to suit the loads being processed. The conveyors form a circuit on which the alignment of the pallets always remains the same, meaning that there was no need for rotating elements. The pallets are stopped for processing at the assembly stations. Here, the pallets are aligned longitudinally to the conveying direction, allowing workers to easily reach every workpiece. Pressing a button releases the pallet again. On the buffering section, the pallets are transported transversely to the conveying direction. This allows a large number of pallets to be buffered one behind the other in a small space. At the transfer to the customer's dipping station, the pallets are stopped again and transported further as soon as the dipping station becomes free again. The controller and sensors were installed by the customer themselves.
参考中译：一位客户需要一个托盘传送系统来生产水管闸阀，在该系统上可以组装和缓冲阀门。该系统需要将阀门运送到客户S浸渍站，在那里检查阀门是否泄漏。每个托盘上加工三个阀门，每个托盘的总重量高达250公斤。托盘必须有在集结站停下来的选项。输送路径需要处于符合人体工程学的工作高度，并根据事故预防法规(UVV)进行保护。来自MK的解决方案。由MK公司提供的输送系统由链式输送机和累积辊式链式输送机组成。选择所用的型材系列以适应正在处理的载荷。传送带形成了一个电路，托盘的对准始终保持不变，这意味着不需要旋转元件。托盘在装配工位停下来进行加工。在这里，托盘与输送方向纵向对齐，使工人能够轻松地接触到每一件工件。按下按钮再次释放托盘。在缓冲部分上，托盘被沿输送方向输送。这使得大量托盘可以在较小的空间内一个接一个地缓冲。在转移到客户S浸渍站时，托盘再次停止，一旦浸渍站再次空闲，托盘就会被进一步运输。控制器和传感器是由客户自己安装的。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024