THE WEAR CONDITION OF SPUR GEARBOX UNDER VARIABLE LOADS USING WEAR DEBRIS ANALYSIS TECHNIQUE - AN INVESTIGATION
参考中译:用磨粒分析技术研究正齿轮变速箱在变载荷下的磨损状况


          

刊名：Journal of automobile engineering
作者：A. S. KUSHWAH（Department of Automobile Engineering, RJIT, Boarder Security Force Academy）
R. B. SHARMA（Department of Automobile Engineering, RJIT, Boarder Security Force Academy）
刊号：873HA004
出版年：2023
年卷期：2023, vol.13, no.1
页码：43-50
总页数：8
分类号：U46
关键词：Gears；Wear；On-Line particle monitoring；Wear debris analysis & load
参考中译：齿轮；磨损；在线颗粒监测；磨屑分析和载荷
语种：eng
文摘：The wear is a very common phenomenon during the meshing of the gears. The development and progression of the wear in gears may create catastrophic failures. In this study, the progression of wear condition in the gear has been predicted with on-line wear debris monitoring from lubricating oil together with visual inspections. The experimental set up has been designed and the experiments were conducted with spur gears under varying load condition. The effect of different load conditions on the progression of wear condition in the gear has been presented. The results demonstrate that the concentration and weight of particles in lubrication oil, and the measured area of wear exist on gear surface during wear progression correlate well with the severity of wear condition of gear acquired from the visual inspection.
参考中译：磨损是齿轮啮合过程中非常常见的现象。齿轮磨损的发展和发展可能会造成灾难性的故障。在这项研究中，通过在线监测润滑油中的磨屑并结合目测来预测齿轮磨损状况的发展。设计了实验装置，并利用直齿圆柱齿轮进行了变载荷条件下的实验。给出了不同载荷条件对齿轮磨损状态演变的影响。结果表明，磨损过程中润滑油中颗粒的浓度和重量以及齿轮表面存在的磨损面积与目测得到的齿轮磨损状况的严重程度有很好的相关性。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024