Optimization of the Gearbox Volume with a Specific Matlab GUI Program
参考中译:用专用的MatLab图形用户界面程序优化变速箱的体积


          

刊名：International review of mechanical engineering
作者：Yazdani A.E.（Department of Mechanical engineering Azad University）
Abyaneh S.（Department of mechanical engineering Sharif University of Technology）
刊号：780MC007
ISSN：1970-8734
出版年：2022
年卷期：2022, vol.16, no.11
页码：590-597
总页数：8
分类号：TH
关键词：Gear Train；Gearbox Volume；GUI Software；Optimization
参考中译：轮系；变速箱体积；图形用户界面软件；优化
语种：eng
文摘：The optimization of any gear train is a challenging process, given the specifications of the mathematical model that explains its performance. This article discusses the design features and optimization of gear trains with spur gears with a specified GUI program based on Matlab coding. It will give a detailed outline of the selection of the design parameters, due to the governing equations and the selection of the optimal values in order to minimize the size of the gearbox with regard to the specific gears’ positions. Hence, after mathematical model development of the gear train, a GUI software is presented for the optimization process. It will then followed by a numerical example which has been compared and validated by the similar results of two other previously published studies for the same gearbox configuration and input data. The results show the effectiveness of the present method in the gearbox volume reduction.
参考中译：考虑到解释其性能的数学模型的规格，任何轮系的优化都是一个具有挑战性的过程。讨论了基于MatLab编码的特定图形用户界面程序的直齿圆柱齿轮传动的设计特点和优化设计。它将给出详细的设计参数的选择，根据控制方程和最优值的选择，以最大限度地减少变速箱相对于特定齿轮位置的尺寸。为此，在建立了轮系的数学模型后，提出了一个用于优化过程的图形用户界面软件。然后给出一个数值算例，该算例已经与之前发表的两个相同变速箱结构和输入数据的研究的类似结果进行了比较和验证。结果表明，该方法在齿轮箱体积缩小方面是有效的。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024