Short-term Creep Behaviour of Different Polymers Used in Additive Manufacturing under Different Thermal and Loading Conditions
参考中译:添加剂制造用不同聚合物在不同温度和载荷条件下的短期蠕变行为


          

刊名：Journal of Mechanical Engineering
作者：Oguz Dogan（Kahramanmaras Sutcu Imam University, Department of Mechanical Engineering）
刊号：780MH001
ISSN：0039-2480
出版年：2022
年卷期：2022, vol.68, no.7/8
页码：451-460
总页数：10
分类号：TH
关键词：Additive manufacturing；Creep experiments；Polymer materials；Thermal effect
参考中译：添加剂制造；蠕变实验；聚合物材料；热效应
语种：eng
文摘：Polymer materials produced by additive manufacturing undergo significant changes In their dimensions under continuous loading conditions. This situation affects the operation of polymer structures produced by additive manufacturing within safe limits. Therefore, it is crucial to determine the creep behaviour of polymers produced by the additive manufacturing method. This study investigates the creep behaviour of six different materials, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene (CPE), polylactic acid (PLA), tough polylactic acid (TPLA), polycarbonates (PC), and nylon most commonly used in additive manufacturing. The creep test specimens are firstly produced with a three-dimensional (3D) printer, and then their final dimensions are given using computer numerical control (CNC) milling. The creep experiments are carried out at three different ambient temperatures (25℃, 40℃, and 60℃) and two different stress levels (10 MPa, 20 MPa). According to the test results, it was determined that the material type, temperature, and loading levels significantly influenced the creep behaviour of the 3D printed polymer materials.
参考中译：由添加剂制造的聚合物材料在连续加载条件下其尺寸发生显著变化。这种情况会在安全范围内影响由添加剂制造产生的聚合物结构的运行。因此，确定由添加剂制造方法生产的聚合物的蠕变行为是至关重要的。本研究研究了六种不同材料的蠕变行为，它们是：丙烯腈-丁二烯-苯乙烯(ABS)、氯化聚乙烯(CPE)、聚乳酸(PLA)、韧性聚乳酸(TLA)、聚碳酸酯(PC)和尼龙(最常用于添加剂制造)。蠕变试验试件首先用三维(3D)打印机制作，然后用计算机数控(NC)铣削得到其最终尺寸。蠕变试验是在三种不同的环境温度(25℃、40℃和60℃)和两种不同的应力水平(10 Mpa、20 Mpa)下进行的。根据试验结果，确定了材料类型、温度和加载水平对3D打印聚合物材料的蠕变行为有显著影响。



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024