Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting


     

标准号J2188_201807
系列名Ground Vehicle Standard
题名Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting
发布时间1996-03
修订时间2018-07-25
机构SAE International
文摘This SAE Recommended Practice takes into account modern standardized methods for collecting and summarizing data that has an effect on vehicle steady-state performance, such as engine output (gross and net), transmission losses, drivetrain efficiency, vehicle aerodynamic devices for various vehicle and body configurations, as well as road surface variations and air density variations resulting from altitude and barometric effects. The procedure does not address vehicle transient performance (acceleration, braking, and cornering), because of the considerable amount of additional data required such as moment of inertia of all the rotating parts. Nor does it address vehicles with torque converters and automatic transmissions. This document is, therefore, intended for vehicles having fixed-ratio type transmissions and positive engagement clutches. Metric and ISO unit conversions are provided in the metric conversion tables at the end of this procedure (see Appendix B). Some modern vehicles with electronic engine controls have the ability to vary the maximum engine revolutions for each gear, as well as permitting the power or rpm to increase if more time is spent in the lower gears, as when climbing a grade. These special cases can be handled by this procedure, just by customizing the data for each transmission ratio and superimposing the long-term data on top of the instantaneous data. All of the equations are written in a form suitable for programming into a mainframe or desk-top computer, using a spreadsheet/database or a higher level language, such as Basic, Fortran, Pascal, C or Unix, etc. However, they are simple enough, to be performed on a hand-held calculator.


相关替代标准：



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  京公网安备11010202008970号  机械工业信息研究院 2018-2024